Siemens Gigaset S450 - Manual (Page 35)

34
Using several handsets
Gigaset S450 / English for Greece / A31008-M1716-T101-1-8U19 / registr_sett.fm / 07.09.2005
De-registering handsets
You can de-register any registered
handset from any registered Gigaset S45
handset.
u
Open list of internal users.
The handset you are currently
using is indicated by <
.
s Select the internal user you
wish to de-register.
§Options§ Open menu.
De-reg. H/Set No.
Select and press §OK§ .
~ Enter current System PIN and
press
§OK§ .
§Yes§ Press the display key.
Locating a handset ("paging")
You can locate your handset using the
base station.
¤
Press the registration/paging key on
the base station briefly.
¤
All handsets will ring at the same time
("paging"), even if the ringers are
switched off.
Ending paging
¤
Briefly press the registration/paging
key on the base station or press the
talk key
c on the handset.
Changing the base station
If your handset is registered to more than
one base station, you can set it to a
particular base station or to the base
station that has the best reception (
Best
Base ).
v
¢
Ð
¢
Handset
¢
Select Base
s Select one of the registered
base stations or
Best Base and
press §OK§ .
Making internal calls
Internal calls to other handsets registered
on the same base station are free.
Calling a specific handset
u Initiate internal call.
~ Enter the number of the
handset.
Or:
u
Initiate internal call.
s Select handset.
c Press the talk key.
Calling all handsets ("group call")
u Initiate internal call.
* Press the star key. All
handsets are called.
Ending a call
a Press the end call key.
Transferring a call to another handset
You can transfer an external call to
another handset (connect).
u
Open list of handsets.
The external caller hears the
wait melody if activated (see
page 42).
s Select a handset or Call All
and press §OK§ .
When the internal participant answers:
¤
If necessary announce the external
call.
a Press the end call key.
The external call is transferred to the
other handset.
If the internal participant does not answer
or is busy, press the display key
§End§ , to
return to the external call.
When diverting a call you can also press
the end call key
a before the internal
participant lifts the receiver.