Siemens Gigaset S450 - Manual (Page 36)

35
Using several handsets
Gigaset S450 / English for Greece / A31008-M1716-T101-1-8U19 / registr_sett.fm / 07.09.2005
Then, if the internal participant does not
answer or is busy, the call will
automatically return to you (the display
will show
Recall ).
Internal consultation calls
When you are speaking to an external
participant you can simultaneously call an
internal participant for consultation.
u
Open list of handsets.
The external caller hears the
wait melody if activated (see
page 42).
s Select handset and press §OK§ .
Ending an enquiry call
§End§ Press the display key.
You are reconnected with the external
caller.
Accepting/rejecting call waiting
If you get an external call while
conducting an internal call, you will hear
the call waiting tone (short tone). The
caller's number will appear in the display
if phone number identification is enabled.
Ending an internal call, accepting an
external call
§Accept§ Press the display key.
The internal call is ended. You are
connected to the external caller.
Rejecting external call
§Reject§ Press the display key.
The call waiting tone is turned off. You
remain connected with the internal
participant. The ringtone can still be heard
at other registered handsets.
Linking internal callers to
an external call
Important: The Listening In function must
be activated.
You are conducting an external call. An
internal caller can listen in on this call and
take part in the conversation. All the
participants are made aware of the
'listening-in' by a signal tone.
Activating/deactivating internal
listening in
v
¢
Ð
¢
Base
¢
Add. Features
¢
Listening In
a Press and hold (idle status).
Internal listening in
The line is engaged with an external call.
Your screen will display information to that
effect You want to listen in to the existing
external call.
c Press
and hold the talk key.
You are linked into the call. All participants
hear a signal tone. During this time, this
handset will not display any information or
messages and no selection can be made
from this handset.
Ending listening in
a Press the end call key.
All participants hear a signal tone.
If the first internal participant presses the
end call key
a, the handset that has
'listened-in' remains connected to the
external caller.