Siemens Gigaset S450 - Manual (Page 34)

33
Using several handsets
Gigaset S450 / English for Greece / A31008-M1716-T101-1-8U19 / registr_sett.fm / 07.09.2005
Using several handsets
Registering handsets
You can register up to a total of six
handsets on your base station.
A Gigaset S45 handset can be registered
on up to four base stations.
Automatic registration Gigaset S45 to
Gigaset S450
Important: The handset must not already
be registered to any base station.
Registering the handset to the Gigaset
S450 base station occurs automatically.
¤
Place the handset in the base with its
display facing forward.
Registration takes around 1 minute.
During this process,
Regstr.Procedure
appears in the display and the name of
the base station flashes e.g.
Base 1 . When
the handset has registered, its screen
displays its internal number, e.g.
INT 2 for
internal number 2. The handset is
assigned the lowest available internal
number (1-6). If all internal numbers 1-6
have been assigned, number 6 is
overwritten, provided the handset with the
internal number 6 is in idle status.
Manual registration Gigaset S45 to
Gigaset S450
You must activate manual registration of
the handset at both the handset and the
base station.
After it has registered, the handset returns
to idle status. The internal number of the
handset appears in the display, e.g.
INT 1 .
If it does not, repeat the procedure.
On the handset
v
¢
Ð
¢
Handset
¢
Register H/Set
s Select base station, e.g. Base
1 and press §OK§ .
~ Enter the system PIN of the
base station (the default is
0000) and press
§OK§ . The
screen will display, e.g. Base
1 .
On the base station
Within 60 secs. press and hold the
registration/paging key on the base
station (page 1) (approx. 3 secs.).
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤
Start to register the handset as
described in its user guide.
On the base station
¤
Press and hold the registration/paging
key on the base station (page 1)
(approx. 3 secs.).
Notes:
– Automatic registration is not possible when
the base station on which you wish to
register the handset is being used to make
a call.
– Each key press interrupts the automatic
registration.
– If automatic registration does not work, you
will have to register the handset manually.
– You can change the name of the handset
(page 36).