Siemens Gigaset S450 - Manual (Page 42)

41
Handset settings
Gigaset S450 / English for Greece / A31008-M1716-T101-1-8U19 / registr_sett.fm / 07.09.2005
You cannot deactivate the confirmation
tone for placing the handset in the base
station.
Setting the alarm clock
Requirement: The date and time have
already been set (page 8).
Activating/deactivating and setting the
alarm clock
v
¢
ì
¤
Change multiple line input:
Alarm Clock:
Select On or Off .
Time:
Enter the wake-up time in 4-digit
format.
Melody:
Select melody.
Volume:
Set the volume (1-6).
¤
Save changes (page 48).
You will see the icon ¼.
A wake-up call with the selected ringer
melody is signalled on the handset. The
wake up call sounds for 60 seconds. The
display shows
Alarm Clock . If no key is
pressed the wake-up call is repeated
twice at five minute intervals and then
switched off.
During a call, the wake-up call is signalled
by a short tone.
Deactivating the wake-up call/
repeating after a pause (slumber
mode)
Requirement: A wake-up call is
sounding.
§Off § Press the display key. The
wake-up call is deactivated.
or
§Snooze§ Press the display key or any
key. The wake-up call is
deactivated and then
repeated after 5 minutes.
After the second repetition the
wake-up call is deactivated
completely.
Restoring the handset
default settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, call-by-call
list, calls list, or SMS lists or the handset's
registration to the base station.
v
¢
Ð
¢
Handset
¢
Reset Handset
§Yes§ Press the display key.
a Press and hold (idle status).
Cancel the restoring process by pressing
a or the display key
§No§ .