Siemens Gigaset S450 - Manual (Page 43)

42
Base station settings
Gigaset S450 / English for Greece / A31008-M1716-T101-1-8U19 / registr_sett.fm / 07.09.2005
Base station settings
The base station settings are carried out
using a registered Gigaset S45 handset.
Protecting against unauthorised
access
Protect the system settings of the base
station with a PIN known only to yourself.
The system PIN must now be entered
when, for example, registering/de-
registering a handset to/from the base
station or when restoring the default
settings.
Changing the system PIN
You can change the 4-digit system PIN
set on the base station (default setting:
0000) to a 4-digit PIN known only to
yourself.
v
¢
Ð
¢
Base
¢
System PIN
~ Enter current System PIN and
press
§OK§ .
~ Enter new system PIN. For
security the PIN is shown as
four stars (****).
s ~ Scroll to the next line, re-enter
new system PIN and press
§OK§ .
a Press and hold (idle status).
Activating/deactivating the
wait melody
v
¢
Ð
¢
Base
¢
Music on hold
Press §OK§ to activate or deactivate the
wait melody ( = on).
Repeater support
With a repeater you can increase the
range and reception strength of your base
station. First you must activate the
repeater mode. This will terminate any
calls currently running through the base
station.
Requirement: A repeater is registered.
v
¢
Ð
¢
Base
¢
Add. Features
¢
Repeater Mode
§Yes§ Press the display key.
When repeater mode is active, the menu
item is marked with
.
Restoring default settings to
base station
When resetting, the handsets remain
registered. The following settings are not
reset:
u System PIN
u Setting "First ringtone suppressed"
u SMS info services
v
¢
Ð
¢
Base
¢
Base Reset
~ Enter the system PIN and
press
§OK§ .
§Yes§ Press the display key.
Cancel the restoring process by pressing
a or the display key
§No§ .
a Press and hold (idle status).
Caution:
Memorise the new system PIN well! If you
forget it, the phone will require specialist
attention. If this happens, contact the Siemens
Hotline (page 45).
‰
‰