beautypg.com

Setting display illumination, Activating/deactivating auto answer, Adjusting the loudspeaker volume – Siemens Gigaset S450 User Manual

Page 40: Changing ringtones, Settings for individual functions

background image

39

Handset settings

Gigaset S450 / English for Greece / A31008-M1716-T101-1-8U19 / registr_sett.fm / 07.09.2005

Setting display illumination

Depending on whether or not the handset
is in the base station you can set different
levels of display illumination. If it is
switched on, the display is permanently
dimmed.
v

¢

Ð

¢

Display

¢

Backlight

The current setting is displayed.

¤

Change multiple line input:

In Charger

Select

On

or

Off

.

without Charger

Select

On

or

Off

.

§Save§

Press the display key.

a

Press and hold (idle status).

Activating/deactivating
auto answer

If you have activated this function, when
you get a call you can simply lift the
handset out of the base station without
having to press the talk key

c.

v

¢

Ð

¢

Handset

Auto Answer

Select and press

§OK§

(

= on).

a Press

and

hold (idle status).

Adjusting the loudspeaker
volume

You can set the loudspeaker volume for
handsfree speaking to five different levels
and the earpiece volume to three different
levels. You can only make these
adjustments during a call.
The handsfree volume can only be
adjusted when this function is set.
You are conducting an external call.
t

Open menu.

r Select

volume.

§Save§

Press display key if necessary
to save the setting
permanently.

If

t is assigned a different function,

e.g. when toggling (page 15):

§Options§

Open menu.

Volume

Select and press

§OK§

.

Configure setting (see above).

Changing ringtones

u

Volume:
You can choose between five volumes
(1–5; e.g. volume 2 =

ˆ) and

the "Crescendo" ring (6; volume
increases with each ring =

‰).

u

Ringtones:
You can choose between 15 different
melodies.

You can configure the following functions
with different ringtones:

u

Ext. Calls

: for external calls

u

Internal Calls

: for internal calls

u

All

: the same for all functions

Settings for individual functions

Set the volume and melody depending on
the type of signalling required.
v

¢

Ð

¢

Audio Settings

¢

Ringer Settings

q

Set, e.g. select

Ext. Calls

and

press

§OK§

.

¤

Change multiple line input:

r

Set volume (1–6).

s

Scroll to the next line.

r

Select melody.

§Save§

Press the display key to save
the setting.

In idle status, you can also open the menu

Ringer Settings

by pressing

t briefly.