Sanyo SCP-7300 - Manual (Page 68)

Contacts List Entry Options
To access Contacts options, display the entry list, highlight an
entry and press
, then select a phone number and press
(right softkey). To select an option, highlight it and
press .
ᮣ Edit to edit your desired label.
ᮣ Call to dial the phone number.
ᮣ Call:Speaker On to dial the phone number in speakerphone
mode.
ᮣ Send Text to send a text message. (See page 118 for details.)
ᮣ Call Alarm to set the call alarm to the entry (see page 71).
ᮣ Set Speed Dial to set the Speed Dial to the entry
(see page 62).
ᮣ Set Voice Dial to set the Voice Dial to the entry (see page 88).
ᮣ Prepend to alter a phone number by adding numbers to the
beginning of the entry. (See “Prepending a Phone Number
From Call History” on page 56.)
ᮣ Copy to Personal to copy the phone number to your 10-4
Personal List. (Only appears when 10-4 mode is set to Enable
and the number does not match any stored entry in your
Personal List.)
Tip: You can view the next entry by pressing the navigation key right or view
the previous entry by pressing the navigation key left.
To erase the selected entry from the Contacts list:
1. Press the navigation key right to display the Contacts list.
2. Highlight the entry you wish to delete using the navigation key.
3. Press (right softkey).
4. Highlight Erase Contact and press .
5. Highlight Yes and press .
Options
Options
60
7300 Bell_EN_3b.qxd 05.1.14 13:37 Page 60