Sanyo SCP-7300 - Manual (Page 139)

Responding to Call Waiting
When you’re on a call, Call Waiting alerts you to incoming calls
by sounding beeps. Your phone’s screen informs you that
another call is coming in and displays the caller’s phone number
(if it is available and you are in digital mode).
To respond to an incoming call while you’re on a call:
ᮣ Press (or press , highlight Flash and press ).
This puts the first caller on hold and answers the second call.
ᮣ To switch back to the first caller, press (or press ,
highlight Flash and press ) again.
Note: Call Waiting may not be available while roaming off the home network.
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the same
time. When using this feature, the normal airtime rates will be
charged for each of the two calls.
1. Enter a number you wish to call and press or .
2. Once you have established the connection, press (or
press , highlight Three-Way Call and press ) to put
the first caller on hold.
3. Enter the second number you wish to call and press (or
press , highlight Call or Call:Speaker On and press ).
4. When you’re connected to the second party, press again
(or press , highlight Flash and press ) to begin your
three-way call.
If one of the people you called hangs up during your call, you
and the remaining caller stay connected. If you initiated the call
and are the first to hang up, all three callers are disconnected.
Tip: You can also begin a Three-Way Call by displaying a phone number
stored in your Contacts list, Call History, or Messaging. To call the third
party, press
during step 3 above.
131
7300 Bell_EN_3b.qxd 05.1.14 13:37 Page 131