Sanyo SCP-7300 - Manual (Page 33)

Setting a Start-up/Power-off Tone
1. Press to access the main menu.
2. Highlight Settings and press .
3. Highlight Sounds and press .
4. Highlight Others and press .
5. Select the menu under Start-up Tone or Power-off Tone and
press .
6. Highlight your desired option and press .
ᮣ Tone to select a tone. You can hear each ringer type by
scrolling.
ᮣ Get New: start up the Browser and you can select an item to
download. (See page 79.)
Tip: The volume of the Start-up Tone and Power-off Tone can be set
through the volume setting. See next page for instructions.
Using Voice Prompt
This feature allows you to hear voice prompts at Voice Memo,
Screen Call setting or Voice Dial etc. (Default Setting is On.)
To deactivate this feature:
1. Follow the steps 1-4 above.
2. Select the menu under Voice Prompt and press .
3. Highlight Off and press .
Tip: When ringer volume is set to “Silence All”, voice prompts cannot be
heard.
25
7300 Bell_EN_3b.qxd 05.1.14 13:37 Page 25