Sanyo SCP-7300 - Manual (Page 127)

5. To add a recipient, press (right softkey), highlight
Add Recipient, and press .
ᮣ Edit to edit the selected entry.
ᮣ Erase to erase the selected entry.
ᮣ Erase All to erase all entries you have selected/entered.
ᮣ Add Recipient to add recipients.
6. Press (left softkey) when you are finished
selecting/entering recipients (you may include up to 10
recipients).
7. To enter a message, select the box under Message and press
.
8. Use your keypad to enter a text message (or press the right
softkey to select from Canned Messages or Recent Messages)
and press
.
9. To set the message priority, select the box under Priority and
press .
10. Highlight Ordinary or Urgent and press .
11. Press (left softkey) to send the message.
To change the recipients or to save the message as a draft, press
(right softkey) and select Chg Recipients or Save to Drafts
during steps 7-10 above.
ᮣ Chg Recipients to change Recipients.
ᮣ Save to Drafts to save the message to a Drafts folder.
(See next page to edit and send the draft message.)
Note: If there is a failure when sending a message, the message goes to
the Outbox folder. See page 121 to send the message.
Options
Send
Next
Options
119
7300 Bell_EN_3b.qxd 05.1.14 13:37 Page 119