Sanyo SCP-7300 - Manual (Page 108)

Making a 10-4 Call (Group Call)
You can make a 10-4 call to all members in a Group entry, which
you have in your 10-4 List. You can communicate with up to five
members at a time.
1. Press (left softkey) or press to access the 10-4 List.
2. Press (left softkey), highlight the list from which you
want to make a Group call (Company GRP. or Personal GRP.),
and press
.
3. Highlight the group you want to call, and press and hold
to place the call and take the floor. (You will see
10-4 calling... and Connecting... followed by “You have floor.”
Continue with the 10-4 call as described above.)
ᮣ To display a group member’s details, press , highlight
your desired group member, then press (left softkey)
during step 3 above. Press to make a 10-4 call to the
member.
ᮣ If one of the group members takes the floor, you will see the
member’s name and 10-4 number on the display. The phone
beeps if you press the 10-4 button when another contact has
the floor.
4. When the call is finished, press .
Tip: You can also make a Group Call after checking the group member.
Press to display group members, highlight and press
and hold during step 3 above.
View
Go to
10-4
100
7300 Bell_EN_3b.qxd 05.1.14 13:37 Page 100