Sanyo SCP-7300 - Manual (Page 16)

Displaying Your Phone Number
1. Press to access the main menu.
2. Highlight Contacts and press .
3. Highlight My Phone# and press .
Note: To access the phone’s main menu, press from standby
mode. Menu items may be selected by highlighting them with the
navigation key and pressing
, or you can press the number
corresponding to the menu item on your keypad.
Making and Answering Calls
Making Calls
To place a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number. (If you make a mistake while dialing,
press to erase one digit at a time. Press and hold to
erase the entire number.)
3. Press or .
4. When you’re finished, press .
Tip: To redial your last outgoing call, press or twice.
Important: When you use your phone to maximize performance, extend
the antenna and do not touch the antenna.
To place a call with the Flip Closed:
1. Make sure your phone is on.
2. Press and hold the Side Call key ( ) on the right side of the
phone. (You will see a message on the Sub LCD.)
Correct Incorrect
8
7300 Bell_EN_3b.qxd 05.1.14 13:37 Page 8