Sanyo VPC-HD1010GX - Manual (Page 166)

147
English
OPERATION SOUNDS
Use this menu to set the confirming audio signals when the camera is turned
on/off or when the operation buttons ([
] button, SET button, MENU
button, etc.) are pressed, to adjust the operation sound volume, and to
enable/disable the audio guide.
1
Display the Option Setting Menu 1 (page 144).
2
Select “OPERATION BEEP”, and
press the SET button.
h If “ALL OFF” is selected and the
SET button pressed, all the
operation sounds are muted.
h If the MENU button is pressed,
you are returned to the Option
Screen.
TURN ON/OFF:
Mute or enable the sound that is
produced when the power is turned
on or off.
SHUTTER:
Select the sound that is produced
when the [
] button is pressed, or
when a photo is taken using the self-
timer.
KEY SW:
Select the sound that is produced
when the SET button, MENU button,
etc. are pressed.
AUDIO GUIDE:
Mute or enable the camera’s audio
help guide.
OPERATION VOL:
Adjust the volume of the operation
sounds.
OK
4
ALL OFF
ON
A
D
ON
OPERATION VOL
AUDIO GUIDE
KEY SW
SHUTTER
TURN ON/OFF
OPERATION BEEP