Sanyo VPC-HD1010GX - Manual (Page 140)

121
English
EXPOSURE COMPENSATION
By assigning the exposure compensation operation shortcut to the SET button
(page 151), you can make the image lighter or darker when capturing images.
1
Assign the operation
shortcut to the SET button
(page 151).
2
Toggle the SET button in
the direction for which the
operation shortcut was
assigned.
h The exposure
compensation bar
appears.
3
Toggle the SET button to
the left or right to adjust the
exposure.
h The exposure
compensation numerical
value is shown at the left
end of the exposure
compensation bar.
h The exposure
compensation can be set
to a value from –1.8 EV to
+1.8 EV.
h The exposure
compensation bar is
canceled when the MENU
button or the SET button is
pressed.
HINT
The exposure compensation setting is canceled in the following cases:
i When the pointer is set to the center position.
i When the camera is set to the playback mode.
i After the power is turned off.
i When the camera is set to the standby mode.
362 00:05:08
SET button
Exposure compensation bar
Pointer