Sun Microsystems StorageTek L40 - Manual (Page 83)

96053 Revision L A-7
Starting SNMP
The library comes configured with some default settings, listed in Table A-1 :
■
Starting SNMP
To start SNMP for the library, you must:
1. Configure the library:
a. Enable the agent
b. Add recipients to the trap list (if needed)
c. Make any optional changes to the default settings.
2. Re-IPL the library for the changes to take effect.
Table A-1. SNMP Default Settings
Setting Default Description
Port number
161
Valid port IDs are 161, and 1024 to 65535
Community String
public
Agent community string. When set to public,
requests coming from any community string
will be accepted.
Grace Period
5 minutes
Once you enter the password, you have 1 to
5 minutes to
Set any values for the agent.
Trap Recipient List
Empty
This list supports up to 12 recipients with
no duplicate entries.
SNMP (agent)
Disabled
Enabled or Disabled