Sun Microsystems StorageTek L40 - Manual (Page 37)

96053 Revision L 1-3
Quick Installation Procedure
18. Press the SELECT button.
The > sign appears to the left of Door Operations. The DOOR MENU:
Push Select to Prepare Library for Opening Door
message
appears.
19. Press the SELECT button.
CAUTION:
Possible hand damage: Always wait for the operator panel to display the
OK To Open Door
message before opening the door. This ensures that
the hand assembly is safely seated.
20. Insert the key into the lock, and unlock and open the door.
21. Insert the labeled cartridges into the library.
Make sure that the cartridge hub is down and the volume label is facing the robot.
22. Close and lock the door, and remove the key.
The library will initialize and audit the cartridges.
23. Configure your tape management software at the console.
24. Place the library online.
25. Record your library configuration information in Table 1-6 on page 1-30 .
26. Make a copy of the table and give it to the customer. The customer will refer to it
when making a service call or ordering features and upgrades.