Sun Microsystems StorageTek L40 - Manual (Page 55)

96053 Revision L 1-21
Standard Installation Procedure
Figure 1-3. Determining the Valid Storage Cells (L201_038)
1. Drive Slot 3
2. Drive Slot 2
3. Drive Slot 1 4. Drive Slot 0
1. Column 0
2. Column 1 3. Column 2
4. Column 3
5. CAP (two cells)
Note: In a 40-cell capacity library, if Auto Clean is not enabled, the cleaning cartridge cell can
be used for a data cartridge, for a total of 41 data cells.
Legend:
•
Use Columns 0 and 1 white cells for the 20-cell configuration.
• Use Columns 0 and 1 white cells and Columns 2 and 3 gray cells for the 40-cell
configuration.
• Use the black cell above the CAP for a cleaning cartridge if Auto Clean is enabled.
• The small, black rectangles are targets.