Siemens 600Series - Manual (Page 97)

Making Calls 3-39
3.
Makin
g
Calls
To clear a station
speed code on a
display
telephone ➩ Press the Program key. The Program status
light turns on. PRESS FEATURE KEY OR
DIAL CODE is displayed.
➩ Press the Station Speed (SPEED) key you
want to clear, or dial # # 3. SPEED DIAL is
displayed.
➩ Enter the station speed code you want to
clear (0 through 9). The dialing sequence is
displayed. (You can view the contents of
other codes by entering their codes now.)
➩ Before NEW NUMBER? is displayed,
press the Clear key. DELETED is
displayed.
➩ If you want to clear another station speed
code, press the Store key. STORED is
displayed. Repeat the three previous steps.
➩ To end setup, press the Program key. The
Program status light turns off. STORED is
displayed.
Note: You cannot clear a station speed key on a non-display
telephone or any telephone without a Clear key, though you
can set it up to dial a different sequence.