Siemens 600Series - Manual (Page 80)

3-22 ROLMphone 300/600 Series User Guide
Last Number Redial
Last Number Redial lets you quickly redial the last number you have
dialed.
Each time you dial a valid internal or external telephone number it is
automatically stored so that you can redial it later. Numbers dialed
during consultation calls and transfers are also stored. (See
“Consultation” on page 3-12 and “Transfer” on page 2-18.)
Only one number is stored at a time, and once you dial a new number
it replaces the number stored previously.
Note: Last Number Redial is only available on Version 6.4 and
higher.
To redial the last
number dialed ➩ Press the Last Number Redial (LNR) key.
OR
➩ Get a dial tone.
➩ Dial # # 4.
Note: If you dial a Least Cost Routing access code followed by a
number, the code and the number are stored for Last Number
Redial.
Feature access codes, and feature access codes followed by a
telephone number, as with the Forwarding feature for
example, are not stored.
If you use Last Number Redial to dial a number during a two-
party call or a conference call, the original call you were on
will be placed on consultation hold. (See “Consultation” on
page 3-12.)