Siemens 600Series - Manual (Page 59)

Making Calls 3-1
3.
Makin
g
Calls
Chapter 3 Making Calls
Bridged Call
The Bridged Call feature lets you join a call if one of the other parties’
extensions also appears on your telephone (a multiple line
appearance).
Although the same extension may appear on several telephones, only
one of the parties with the same multiple line appearance can use the
Bridged Call feature to join a call. Once a call has been bridged,
another party with the same multiple line appearance cannot then
bridge into the call. Bridging also cannot take place if either of the
other original two parties are on hold or have turned on the Privacy
feature.
During a call that has been bridged, none of the parties can use their
key pads to enter feature access codes.
To join a
conversation on a
multiple line ap-
pearance ➩ Press the line key whose status light is on.
➩ Listen for the conference tone. Both parties
on the other end will also hear the tone, and
you will be joined in a three-way
conversation. With display telephones,
CONFERENCE is displayed on your
telephone and CONFERRNG 1-2 is
displayed on the bridged party’s telephone.
➩ Begin speaking. If you do not have a
speakerphone, you must pick up your
handset to speak to the other parties.