Siemens 600Series - Manual (Page 73)

Making Calls 3-15
3.
Makin
g
Calls
➩ To end setup, press the Program key. The
Program status light turns off, and
STORED is displayed if you have a display
telephone.
➩ On your faceplate, use a pencil to label
each DSS key you changed with the name
or extension of the person it dials.
To clear a DSS
key on a display
telephone ➩ Press the Program key. The Program status
light turns on, and PRESS FEATURE
KEY OR DIAL CODE is displayed.
➩ Press the DSS (D-) key you want to clear.
DIRECT STATION SELECT is displayed,
followed by the stored extension.
➩ Before NEW NUMBER? is displayed,
press the Clear key. DELETED is
displayed.
➩ If you want to clear another D-key, repeat
the previous two steps.
➩ To end setup, press the Program key. The
Program status light turns off.
➩ On your faceplate, erase the label next to
each D- key you have cleared.
Note: You cannot clear a DSS key on a non-display telephone or any
telephone without a Clear key, though you can set it up to dial
a different extension.
To dial a DSS
extension ➩ Press the DSS (D-) key for that extension.
The other party will hear a triple beep.