Rolmphone basics, Faceplate, Line keys – Siemens 600Series User Manual
Page 25: Multiple line appearance, Rolmphone basics -11
Introduction
1-11
1.
Int
roduc
tion
ROLMphone Basics
Faceplate
The faceplate is a paper template that identifies features that you
access by pressing specific keys on your telephone. It shows which
system features have been assigned to your telephone keys.
Line Keys
Your ROLMphone telephone has a separate line key for every
extension that appears on your telephone. You use the line keys to
answer and place calls.
Multiple Line Appearance
Your telephone may have multiple extensions, each of which is
assigned a separate line key. These line keys can be of different types.
You will have at least one line key, called the primary line key, which
corresponds to your extension. The status light that turns on when you
pick up your handset is next to your primary line key.
You may also have other lines on your phone. You can use both the
primary line and these other lines to make calls.
Your lines may also appear as lines (called multiple line appearances)
on other people’s phones. Each person with an appearance of the line
on his or her telephone has equal access to the line. Also, a call can be
placed on hold at one telephone, then retrieved at another telephone on
which that same line appears. See “Hold” on page 2-15 for more
information.
If you have a multiple line appearance on your telephone, you will
need to know how to tell if that line is in use. Your telephone tells you
about the status of a line through the line key’s status light. See “Status
Lights” on page 1-16 for more information.