Siemens 600Series - Manual (Page 85)

Making Calls 3-27
3.
Makin
g
Calls
To clear a
repdial key on a
display
telephone ➩ Press the Program key. The Program status
light turns on. PRESS FEATURE KEY OR
DIAL CODE is displayed.
➩ Press the repdial (R-) key you want to
clear. REPDIAL is displayed, followed by
the dialing sequence.
➩ Before NEW NUMBER? is displayed,
press the Clear key. DELETED is then
displayed.
➩ To clear another R- key, press the Store
key. STORED is displayed. Repeat the two
previous steps.
➩ To end setup, press the Program key. The
Program status light turns off.
➩ On your faceplate, erase the label next to
each R- key you have cleared.
Note: You cannot clear a repdial key on a non-display telephone or
any telephone without a Clear key, though you can set it up to
dial a different sequence.
To dial using a
repdial key ➩ Press the repdial (R-) key.