Load the document(s). the display will show, Set the resolution and/or contrast if desired – Sharp FO-1470 User Manual

Page 62

Sending a Fax by Automatic Dialing

Press the Rapid Key corresponding to
the desired Speed Dial number.

• The name of the receiving party

will appear in the display. If no
name was stored, the fax number
will appear. (If the name or number
is incorrect, press the STOP key.)

• If the Speed Dial number is from 19

to 36, press the SHIFT key and
then press the Rapid key.

• The document will be

automatically transmitted once the
connection is established.

Rapid Key Dialing

If the number you want to dial has been stored for Automatic Dialing
as a Speed Dial number from 01 to 36, you can dial it by pressing the
corresponding Rapid Key.

Load the document(s).

The display will show:

Example: To dial Speed
Dial number 02, press
Rapid Key 02/20.

READY TO SEND

• Set the resolution and/or contrast if

desired.

Example: To dial Speed
Dial number 20, press the
SHIFT key and press Rapid
Key 02/20.

RESOLUTION

SHIFT

all-ux510A.book Page 60 Thursday, September 14, 2000 9:05 AM