Sharp FO-1470 - Manual (Page 56)

Sending a Fax by Normal Dialing
54
4
Wait for the connection. Depending
on the setting of the receiving
machine, you will either hear a
facsimile reception tone or the other
person will answer.
• If the other party answers, ask them
to press their Start key (if you
pressed the SPEAKER key, pick
up the handset to speak with them).
This causes the receiving machine
to issue a reception tone.
Using the REDIAL key
You can press the REDIAL key to redial the last number dialed. To
send a document, press the START key when you hear the fax tone
after the connection is established. Note that the speaker is
automatically activated when you press the REDIAL key.
5
When you hear the reception tone,
press the START key. Replace the
handset if you used it.
• When transmission is completed,
the fax will beep once.
3
Dial the number of the receiving
machine by pressing the number keys.
(Example)
2 4 3 2 5 6 7
START
Beep
all-ux510A.book Page 54 Thursday, September 14, 2000 9:05 AM