Sharp FO-1470 - Manual (Page 115)

Entering and Using Programs
113
8. S
pec
ia
l
Func
ti
ons
Entering and Using Programs
If you frequently perform the same operation involving the same party,
you can program all the steps of the operation into one Program Key.
This allows you to perform the operation by simply pressing that key.
♦ Rapid Keys 15/P1 and 16/P2 can be used as Program Keys. How-
ever, a key cannot be used if it is already being used for Rapid Key
Dialing.
♦ Only Speed Dial numbers can be used to enter fax numbers of
receiving machines in the Program Keys. Full numbers cannot be
entered.
♦ If the program is for a regular transmission or polling operation, a
timer setting can be included to have the operation performed auto-
matically at a selected time.
♦ To clear a mistake, press the STOP key.
Initial procedure
To program a Program Key, first perform the following procedure.
After you have completed this procedure, go to the procedure for the
specific operation you want to program (see the following pages).
1
Press these keys:
The display will show:
2
Press 1 to select SET.
3
Select a Program Key ("15/P1" or
"16/P2") to select it.
1
7
FUNCTION
or
PRG.ENTRY MODE
15/P1
33
16/P2
34
all-ux510A.book Page 113 Thursday, September 14, 2000 9:05 AM