Sharp FO-1470 - Manual (Page 49)

Transmittable Documents
47
3. S
ending
Doc
u
ments
Note: Letters or graphics on the edges of a document will not be
scanned.
Other restrictions
♦ The scanner cannot recognize yellow, greenish yellow, or light blue
ink.
♦ Ink, glue, and correcting fluid on documents must be dry before
they pass through the document feeder.
♦ All clips, staples, and pins must be removed from documents before
loading in the feeder. If these are not removed, they may damage
the machine.
♦ Documents which are patched, taped, torn, smaller than the mini-
mum size, carbon backed, easily smudged, or have a slippery
coated surface should be photocopied, and the copy loaded in the
feeder.
♦ If the leading edge of the document is bent or curves up, straighten
it before placing the document in the feeder.
0.16"(4 mm) 0.16"(4 mm)
0.2"(5 mm)
0.2"(5 mm)
Letters in the
shaded area will
not be scanned.
all-ux510A.book Page 47 Thursday, September 14, 2000 9:05 AM