Sharp FO-1470 User Manual

Page 133

Problems and Solutions

131

11. T

roub

hooti

A received document or
copy prints out in strips.

• Make sure the printer compartment cover are

completely closed (press down on both sides of
each).

The quality of copies is
poor and/or black spots
appear.

• Any dirt or material on the scanning glass will

cause spots to appear on copies and transmitted
faxes. Clean the scanning glass as explained on
page 127.

Reception/copying is
interrupted.

• If reception or copying takes place continuously for

a long time, the print head may overheat. Turn off
the power and let it cool down.

Answering machine connection

Problem

Solution

The answering machine
connection does not
operate properly.

• Make sure that the reception mode is set to A.M..

(see page 82).

• Make sure your fax machine's TEL. LINE jack is

connected to the wall jack. Make sure your fax
machine's TEL. SET jack is connected to your
answering machine's telephone line jack (not the
answering machine's extension phone jack).

• Make sure your answering machine's outgoing

message is under 10 seconds.

• Make sure that the Quiet Detect Time setting is set

to three or four seconds (see page 84).

• Make sure that the Distinctive Ring function is set

to OFF SETTING (see page 92).

• If you have checked all of the above and the

hookup still doesn't operate properly, call the
Customer Assistance Center.

all-ux510A.book Page 131 Thursday, September 14, 2000 9:05 AM