Sharp FO-1470 - Manual (Page 61)

Sending a Fax by Automatic Dialing
59
3. S
ending
Doc
u
ments
Storing numbers in Group Keys
Group Keys allow you to dial a group of fax numbers by simply
pressing the appropriate Group Key once. To store a group of numbers
in a Group Key, follow the steps below.
♦ Rapid Key that is not already programmed as a Rapid Key or a Pro-
gram Key can be used as a Group Key.
♦ Up to 20 numbers can be stored in one Group Key.
♦ Only Rapid Key and Speed Dial numbers can be stored in a Group
Key. Full numbers cannot be stored.
1
Press these keys.
The display will show:
4
Enter the Rapid Key or Speed Dial
numbers of the receiving machines.
3
Press a Group Key (Rapid Key 17/G1
or 18/G2) to select it.
If you are clearing a Group Key, press
it and go to Step 5.
GROUP ENTRY MODE
FUNCTION
7
or
SET CLEAR
1 2
16/P2
34
17/G1
35
18/G2
36 OpenLCR
(Example)
2
Press 1 (SET) to program a Group
Key, or 2 (CLEAR) to clear a Group
Key.
5
Press the START key.Return to Step
3 to program another Group Key, or
press the STOP key repeatedly until
you return to the date and time
display
(Example)
1 0 0 2
Step 3 or
START
STOP
all-ux510A.book Page 59 Thursday, September 14, 2000 9:05 AM