Sharp FO-1470 - Manual (Page 58)

Sending a Fax by Automatic Dialing
56
Storing fax and telephone numbers for Automatic Dialing
1
Press these keys:
The display will alternately show:
2
Press the 1 key to select SET.
The display will alternately show:
3
Enter a two-digit Speed Dial number
by pressing the number keys (01 to
36 for Rapid Key Dialing, 37 to 99
for Speed Dialing).
4
Enter the fax or voice number by
pressing the number keys.
(Note: A space cannot be entered.)
• To clear a mistake, press the
SPEED DIAL key.
♦ If a pause is required between any of the digits to access a special
service or an outside line, press the REDIAL key (two seconds per
pause). The pause will appear as a hyphen. Several pauses can be
entered in a row.
FAX/TEL # MODE
1=SET,2=CLEAR
FAX/TEL # SET
ENTER SPEED #
(Example)
(Example)
3
2 4 3 2 5 6 7
FUNCTION
1
1 0
all-ux510A.book Page 56 Thursday, September 14, 2000 9:05 AM