Sharp FO-1470 User Manual
Page 129
Maintenance
127
10. Mai
n
tenanc
e
Scanning glass and rollers
Clean the scanning glass and rollers frequently to ensure the quality of
transmitted images and copies. Open the operation panel by pulling
the front edge up (grasp it at the PANEL RELEASE mark), and clean
the scanning glass and rollers as shown below.
♦ Wipe the scanning glass, white backplate, and rollers with a soft
cloth or a cotton pad.
♦ Make sure that all dirt and stains (such as correcting fluid) are
removed, as these will cause vertical lines on transmitted images
and copies.
Document
rollers
Scanning glass
White
backplate
The housing
Wipe the external parts and surface of the machine with a dry cloth.
Caution!
♦ Do not use benzene or thinner. These solvents may damage or dis-
color the machine.
all-ux510A.book Page 127 Thursday, September 14, 2000 9:05 AM