Sharp FO-1470 - Manual (Page 60)

Sending a Fax by Automatic Dialing
58
2
Press 2 to select CLEAR.
3
Enter the Speed Dial number that you
want to clear by pressing the number
keys.
FAX/TEL # MODE
1=SET,2=CLEAR
(Example)
Clearing auto-dial numbers
1
Press these keys:
The display will show:
4
Press the START key.
5
Return to Step 3 to clear another
number, or press the STOP key to
return to the date and time display.
Step 3 or
Making changes
To make changes in a number previously stored, repeat the
programming procedure. Select the Rapid Key or Speed Dial number
for which you want to make changes in Step 3, and then change the
number and/or name when they appear in the display in Steps 4 and 6.
Note: The fax machine uses a lithium battery to keep automatic dialing
numbers and other programmed data in memory when the power is turned
off. Battery power is consumed primarily when the power is off. With the
power kept continuously off, the life of the battery is about 5 years. If the
battery dies, have your dealer or retailer replace it. Do not try to replace it
yourself.
3
FUNCTION
2
1 0
START
STOP
all-ux510A.book Page 58 Thursday, September 14, 2000 9:05 AM