Sharp FO-1470 - Manual (Page 52)

Adjusting the Resolution and Contrast
50
Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a
document.
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
Resolution settings
Contrast settings
STANDARD Use STANDARD for ordinary documents.
This setting gives you the fastest and most
economical transmission.
FINE Use FINE for documents containing small
letters or fine drawings.
SUPER FINE Use SUPER FINE for documents containing
very small letters or very fine drawings.
HALF TONE Use HALF TONE for photographs and
illustrations. The original will be reproduced
in 64 shades of gray.
AUTO Use AUTO for normal documents.
DARK Use DARK for faint documents.
You must adjust the settings
each time you don’t want to
use the default settings.
The default
resolution setting
is STANDARD
and the default
contrast setting
is AUTO.
all-ux510A.book Page 50 Thursday, September 14, 2000 9:05 AM