Sharp FO-1470 - Manual (Page 37)

Setting Up and Using OpenLCR
35
2. S
etti
ng Up
O
penLCR
Downloading (receiving) the rate data manually
Your fax machine will automatically call OpenLCR and download
updated rate data about once every three months. Normally you will
not need to download the rate data manually.
♦ If you register through OpenLCR’s Web site, you must manually
download the rate data to activate service.
♦ If the fax machine is unplugged or some other interruption occurs in
the power, you will need to manually download the rate data.
Press these keys to call OpenLCR and initiate downloading:
Downloading lasts one or two minutes. During this time the display
will show:
LCR DOWNLOADING
When downloading is completed, the display will briefly show
DOWNLOAD OK!! and then revert to the date and time. OpenLCR
will also program the date and time and your fax number in your fax
machine.
Note: OpenLCR cannot be used if your fax machine is connected to a
Private Branch Exchange (PBX).
OpenLCR 2
all-ux510A.book Page 35 Thursday, September 14, 2000 9:05 AM