Savin 1075 - Manual (Page 20)

Preparations for Use as a Network Scanner
16
2
Initial Scanner Setup
This section explains all required settings and procedures for using the machine
as a network scanner.
Default Settings
Settings to use the functions of the machine as a network scanner are listed be-
low. Make correct setting of necessary items.
Important
❒ Items marked ✩ are the minimum required settings for using the machine as
a network scanner. Be sure to set these items before use.
❒ Items marked ❍ should be set if required.
❖ ❖ ❖ ❖ System settings
For information about the settings, see the General Settings Guide.
*1 Settings for use as network TWAIN scanner
*2 Settings for use as network delivery scanner
*3 Settings for e-mail
*4 Settings for use as document server
*5 Do not change this setting. It must be left at the factory default value.
*6 When delivery option sets “On”, make sure that IP address is set.
Settings TWAIN
*1
Delivery
*2
E-mail
*3
Store
*4
Timer Settings Scanner Auto Reset Timer ❍ ❍ ❍
Interface settings
[Network]
IP Address ✩ ✩ ✩ ✩
Sub-net Mask ❍ ❍ ❍ ❍
Gateway Address ❍ ❍ ❍ ❍
Network Boot ❍ ❍ ❍
Effective Protocol *5 ❍ ❍ ❍ ❍
NW Frame Type
❍ ❍ ❍
LAN Type
❍ ❍ ❍
Ethernet Speed
❍ ❍ ❍
File transfer settings Delivery Option *6 ❍
Scanner Recall Interval time
❍ ❍
Number of Scanner
Recalls
❍ ❍
Key Operator Tools Address Book Management ❍
Address Book: Program/
Change/Delete Group ❍
Address Book: Change
Order ❍
Address Book: Edit Title ❍
Address Book: Select Title ❍