Siemens HIPATH 1200 - Manual (Page 27)

Making Calls – Basic Functions
27
Step by Step
Using Callback
If a user is busy or is not answering, you can store an
automatic callback. This feature saves you from having
to make repeated attempts to reach the user.
You receive a callback,
•
When the other party is no longer busy
• When the user who did not answer has conducted
another call.
Storing a Callback
Precondition: You have reached a busy line or no one
answers.
:
Confirm.
or
qil
Enter the code.
or Your HiPath 1200 can also be programmed so that a
callback request is automatically saved ("Activation via
Timeout" is set to "Callback"; consult service personnel).
Wait (approx. 3 seconds) until "Callback set" appears on
the display and there is a brief interruption in the busy
tone or ring tone.
Answering a Callback
Precondition: A callback was saved. Your telephone
rings: "Callback: ..." appears on the display.
n
Lift the handset.
or
Press the key. The LED lights up.
You hear a ring tone.
Callback?
Callback set
Speaker