Sharp Digital Laser Copier/Printer AR-5127 - Manual (Page 21)

AR-5127 ADJUSTMENTS 7 - 2
(3) Developing bias voltage adjustment (SIM 8-1)
1) Execute SIM 8-1.
2) After selecting the mode, enter the adjustment value and press the
[OK] key.
3) Output will be made for 30 sec.
(4) Grid bias voltage adjustment (High mode) (SIM 8-2)
1) Execute SIM 8-2.
2) After selecting the mode, enter the adjustment value and press the
[OK] key.
3) Output will be made for 30 sec.
∗ The input value is in the increment of –25V.
(5) Grid bias voltage adjustment (Low mode) (SIM 8-3)
1) Execute SIM 8-3.
2) After selecting the mode, enter the adjustment value and press the
[OK] key.
3) Output will be made for 30 sec.
∗ The input value is in the increment of –25V.
B. Mechanism section
(1) OC image lead edge position/Sub scanning
magnification ratio/Original offset auto adjustment
When executing the sub scan magnification ratio automatic adjustment
(SIM 48-3), keep the side cover open.
1) Set the test chart (UKOG-0011QSZZ) on the OC table.
2) Execute SIM 48-3.
3) Make a copy.
(2) Print start position adjustment
1) Execute SIM 50-5.
Select the mode with the arrow keys, enter the adjustment value
with the 10-key, and press the [OK] key.
Pressing the [START] key makes a print.
Pressing the [RETURN] key returns to the mode selection.
Display items Content
Installation
range
Default
1:AE AE 200-550 400 (–400V)
2:TEXT Character 450 (–450V)
3:TEXT/PHOTO Character/Photo 450 (–450V)
4:PHOTO Photo 450 (–450V)
5:SUPER PHOTO
Super photo Disabled
6:TONER SAVE
Toner save 376 (–376V)
Display items Content
Setting
range
Default
1:AE AE 1-8 3 (–530V)
2:TEXT Character 5 (–580V)
3:TEXT/PHOTO Character/Photo 5 (–580V)
4:PHOTO Photo 5 (–580V)
5:SUPER PHOTO
Super photo Disabled
6:TONER SAVE
Toner save 2 (–505V)
A
Sim8-1 DV BIAS COPY
1:AE 400
2:TEXT 450
3:TEXT/PHOTO 450
1/2
Sim8-2 MHV(H) COPY
1:AE 3
2:TEXT 5
3:TEXT/PHOTO 5
1/2
Display items Content
Setting
range
Default
1:AE AE 1-8 3 (–400)
2:TEXT
Character 5 (–450)
3:TEXT/PHOTO
Character/Photo 5 (–450)
4:PHOTO
Photo 5 (–450)
5:SUPER PHOTO Super photo Disabled
6:TONER SAVE Toner save 2 (–375)
(Initial screen) (Input screen) (Executing screen)
Display
items
Content
Setting
range
Default
1:TRAY1
1st cassette 0-99 53
2:OPTION
Option cassette 1-99
3:MANUAL
Manual feed
4:DUPLEX Back print
Sim8-3 MHV(L) COPY
1:AE 3
2:TEXT 5
3:TEXT/PHOTO 5
1/2
Set the test chart
(UKOG-0011QSZZ) Black White
Sim50-5 PRINT EDGE
1:TRAY1 50
2:OPTION 50
3:MANUAL 50
1/2 50