Juniper Networks EX4200 - Manual (Page 100)

Table 22: Uplink Modules Connector Pinout Information for EX3200 and EX4200 Switches (continued)
Pin Name Pin Number
GND I3
GND I4
GND I5
GND I6
GND I7
GND I8
GND I9
GND I10
GND I11
GND I12
GND I13
GND I14
GND I15
Serial_TX I16
GND I17
Uplink_P28_LED1 I18
GND I19
POWER (12V) I20
Related Topics ■ Uplink Modules in EX3200 and EX4200 Switches on page 33
■ Front Panel of an EX3200 Switch on page 8
■ Front Panel of an EX4200 Switch on page 10
■ Installing an Uplink Module in an EX3200 or EX4200 Switch on page 133
■ Removing an Uplink Module from an EX3200 or EX4200 Switch on page 175
Virtual Chassis Ports Connector Pinout Information for EX4200 Switches
EX4200 switches use a 68-pin connector cable to interconnect switches to form a
Virtual Chassis. The cable is provided with the switch. Table 23 on page 75 provides
the Virtual Chassis ports (VCPs) connector pinout information.
74 ■ Virtual Chassis Ports Connector Pinout Information for EX4200 Switches
Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches