JVC SR-VS20EK - Manual (Page 52)

52
Remote
Control
Functions
1 2 3
4 5 6
7 8 9
1
2
1
2
3
0
3
4
4
NUMBER "4"
NUMBER "3"
ADVANCED OPERATIONS (cont.)
NUMBER "1"
Remote A/B/C/D Code
Switching
The remote control is capable of controlling four JVC video
recorders independently. Each of recorders can respond to one
of four codes (A, B, C or D). The remote control is preset to
send A code signals because your video recorder is initially set
to respond to A code signals. You can easily modify your video
recorder to respond to B, C or D code signals.
On Remote Control
DISPLAY CODE
1
Hold down VHS or DV on the remote control. The
code currently set blinks on the LCD panel.
CHANGE REMOTE
CONTROL'S CODE
2
Press the NUMBER key "1" for A , "2" for B , "3" for C,
or "4" for D.
SET REMOTE CONTROL'S
CODE
3
Press OK to set the code.
On Recorder
DISPLAY CODE
1
Press PLAY on the recorder over 5 seconds when the
recorder is turned off. The code currently set appears
on the front display panel.
● If the code displayed on the front display panel is
different from the code set on the remote control, go
to step 2.
CHANGE RECORDER'S
CODE
2
Press any key on the remote control. The code currently
set on the remote control will be applied to the
recorder.
NOTE:
During Power Save, it is impossible to change the remote
control's code.
LCD panel
OK
PLAY
VHS
DV
NUMBER "2"