JVC SR-VS20EK - Manual (Page 26)

26
1 2 3
4 5 6
7 8 9
1
2
1
2
3
0
3
4
4
Super VHS (S-VHS),
Super VHS ET (S-VHS ET)
and VHS
(VHS Deck Only)
Your recorder can record in S-VHS, S-VHS ET or VHS.
To record in S-VHS:
Perform the steps 1 – 4 below to set "S-VHS" to "ON".
Then, insert a cassette marked "S-VHS", the S-VHS indicator will
light on the display panel.
The S-VHS recording mode will be selected.
To record in S-VHS ET on a VHS cassette:
See "Super VHS ET (S-VHS ET)" on page 27.
To record in VHS:
Insert a cassette marked "VHS".
Press S-VHS ET on the recorder. You can check the current
setting ("S-VHS ET : ON" or "S-VHS ET : OFF") if "O.S.D." is set
to "ON" (
੬
pg. 55). If "S-VHS ET : ON" appears on the TV
screen, press S-VHS ET again in about 5 seconds to set it to
"OFF".
The VHS recording mode will be automatically selected
regardless of the S-VHS mode setting.
To record in VHS on an S-VHS cassette:
Insert the cassette marked "S-VHS", the S-VHS indicator will
light on the display panel.
Then, perform the steps 1 – 4 below to set the "S-VHS" to "OFF";
the S-VHS indicator will go out.
The VHS recording mode will be selected.
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar
(pointer) to "VHS MODE
SET" by pressing
%fi, then
press OK or
#
.
SELECT S-VHS MODE
3
Move the highlight
(pointer) to "S-VHS" by
pressing
%fi, then press
OK or
#
to select "ON" or
"OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
When playing back a tape that has been recorded in S-VHS, the
S-VHS indicator lights on the display panel regardless of the
"S-VHS" mode setting.
ADVANCED OPERATIONS
Recording
According To
Tape Type
Turn on the TV and select the AV mode.
VHS MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO SP =LP TIMER OFF
DIGITAL 3R ON
S-VHS ON
DIGITAL TBC/NR ON
VIDEO STABILIZER OFF
[ 5∞] =
[MENU] : EXIT
S-VHS ET
OK
MENU
MAIN MENU
MODE SET
VHS MODE SET
DV MODE SET
AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
[ 5∞] =
[MENU] : EXIT