JVC SR-VS20EK - Manual (Page 30)

30
Your video recorder is equipped with automatic tracking control.
For most tapes this will automatically adjust the tracking to suit
the particular tape you are playing. In some circumstances it may
be necessary to make manual tracking adjustments. This is
usually only associated with old or worn tapes or recordings
made on old or worn recorders. If the automatic tracking control
fails to operate correctly you will see noise bars across the picture
as shown on the left below. To correct this you can override the
automatic control and adjust
the tracking manually by
pressing the PR buttons.
ADVANCED OPERATIONS (cont.)
OVERRIDE AUTOMATIC TRACKING
1
Press on the remote to engage manual tracking.
ADJUST TRACKING MANUALLY
2
Press PR + or – to adjust tracking.
RETURN TO AUTOMATIC TRACKING
3
Press on the remote to re-engage automatic
tracking.
NOTE:
When a new tape is inserted, the recorder returns to the
automatic tracking mode automatically.
Playback
Picture
Adjustment
Digital TBC/NR
(VHS Deck Only)
Your video recorder is equipped with a Digital TBC (Time Base
Corrector) that removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes and rental cassettes.
The on/off of Digital 3-DNR (Noise Reduction) which cuts noise
and enables clear picture reproduction is also linked to this
function.
* The default setting is "ON".
We recommend that you use the Digital TBC feature when...
... playing back a tape recorded on a camcorder.
... playing back a tape repeatedly used.
... using this video recorder as the player for editing.
1 2 3
4 5 6
7 8 9
1
2
1
2
3
0
3
4
4
Manual Tracking
(VHS Deck Only)
NOTES:
● If you play back a tape recorded under poor TV reception
condition, there may be cases where the picture becomes
more stable with "DIGITAL TBC/NR" set to "OFF".
● When "DIGITAL TBC/NR" is set to "ON", if you play back a
tape where certain types of signals are recorded (using a PC
or some character generators), the playback picture may be
distorted. If this is the case, set "DIGITAL TBC/NR" to "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar
(pointer) to "VHS MODE
SET" by pressing
%fi, then
press OK or
#
.
SELECT DIGITAL TBC/NR
SET MODE
3
Move the highlight bar
(pointer) to "DIGITAL
TBC/NR" by pressing
%fi,
then press OK or
#
to set
to "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
MAIN MENU
MODE SET
VHS MODE SET
DV MODE SET
AUTO CH SET
MANUAL CH SET
OUTPUT/INPUT SET
INITIAL SET
[ 5∞] =
[MENU] : EXIT
VHS MODE SET
B. E. S. T. ON
PICTURE CONTROL AUTO
AUTO SP =LP TIMER OFF
DIGITAL 3R ON
S-VHS ON
DIGITAL TBC/NR ON
VIDEO STABILIZER OFF
[ 5∞] =
[MENU] : EXIT
PR
MENU
OK