JVC SR-VS20EK - Manual (Page 46)

46
ADVANCED OPERATIONS (cont.)
DV Audio Dubbing
This function lets you record new audio, without erasing the
original audio, on a DV tape that was recorded with "SOUND
MODE" set to "12BIT" (
੬
pg. 35). You can then play back
audio that you recorded by connecting other audio or video
equipment to this recorder.
You cannot perform audio dubbing on a tape that was recorded
with "SOUND MODE" set to "16BIT", on a tape that was
recorded at the "LP" speed, or on a blank tape.
A. DUB
VHS Audio Dubbing
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack.
ATTENTION:
Audio dubbing is not possible with a cassette recorded in EP
mode.
Audio Dubbing
Original sound
AUDIO OUT
Audio mixer
Audio-dubbed tape
CD Player etc.
Mixer output
Pre-recorded tape Normal audio track
Video/Hi-Fi audio
track
CD Player etc.
MAKE CONNECTIONS
1
Connect an audio component to the AUDIO L + R
connectors on the recorder's front panel.
● When connecting monaural equipment, use only the
recorder's AUDIO L connector.
SELECT RECORDING DECK
2
Press VHS.
SET INPUT MODE
3
Press NUMBER key "0" and/or PR so that "F-1" appears
in place of a preset number.
LOCATE START POINT
4
Press PLAY to start playback of the tape in your
recorder, and press PAUSE when you find the point
where you want to start dubbing.
1 2 3
4 5 6
7 8 9
1
2
1
2
3
0
3
4
4
VHS
PAUSE
NUMBER "0"
DV
PLAY
NOTE:
To use the DV deck as the recording deck, press ← and then
DV after selecting "F-1" in step 3. The dubbing direction
(
← VHS) indicator lights.
PR