S-vhs/audio out setting, Vhs f-1 input setting – JVC SR-VS20EK User Manual
Page 51
51
S-VHS/AUDIO OUT Setting
Set "S-VHS/AUDIO OUT" to the appropriate mode depending on the selection of the playing deck (VHS or DV) for editing.
1
Press MENU to access the Main Menu screen.
2
Press
%fi to move the highlight bar (pointer) to "MODE SET", then press OK or
#
.
3
Press
%fi to move the highlight bar (pointer) to "S-VHS/AUDIO OUT".
4
Press OK or
#
to select "AUTO", "VHS" or "DV".
a–AUTO
: The recorder outputs the signals from the deck being used automatically.
The on-screen display is also output.
b–VHS
: The recorder outputs only the signals from the VHS deck. The on-screen
display is not output.
c–DV
: The recorder outputs only the signals from the DV deck. The on-screen dis-
play is not output.
5
Press MENU to return to normal screen.
● If you select "VHS" or "DV", the Main Menu screen will not appear even when MENU is pressed. To change the menu settings,
connect your TV to the recorder's AV1 (L-1) IN/OUT connector, not to the S OUT/AUDIO OUT connectors.
MODE SET
S-VHS/AUDIO OUT
AUTO
O. S. D.
ON
AUTO TIMER
OFF
DIRECT REC
ON
POWER SAVE
OFF
[
5∞] =
[MENU] : EXIT
VHS F-1 INPUT Setting
Set "VHS F-1 INPUT" to the appropriate mode depending on the connector (VIDEO or S-VIDEO input connector) being used on
the front panel.
1
Press MENU to access the Main Menu screen.
2
Press
%fi to move the highlight bar (pointer) to "OUTPUT/INPUT SET", then press OK or
#
.
3
Press
%fi to move the highlight bar (pointer) to "VHS F-1 INPUT".
4
Press OK or
#
to select "VIDEO" or "S-VIDEO".
a–VIDEO
: If a connected device's output is compatible only with regular video
signals, set "VHS F-1 INPUT" to "VIDEO".
b–S-VIDEO
: If a connected device's output is compatible with Y/C signals, set
"VHS F-1 INPUT" to "S-VIDEO". This setting will let you take advantage of
higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin
SCART cable that is compatible with the Y/C signal.)
5
Press MENU to return to normal screen.
OUTPUT/INPUT SET
L-1 OUTPUT
VIDEO
L-1 INPUT
VIDEO
L-2 SELECT
A/V
VHS
F-1 INPUT
VIDEO
[
5∞] =
[MENU] : EXIT