Juniper Networks JUNOS OS 10.4 - Manual (Page 168)

}
interfaces ge-1/0/0 {
gigether-options {
802.3ad ae0;
}
}
interfaces ge-5/0/0 {
gigether-options {
802.3ad ae0;
}
}
interfaces ae0 {
unit 0 {
family inet {
address 11.11.11.1/24;
}
}
}
protocols {
oam {
ethernet {
link-fault-management {
interface ae0;
}
}
}
}
Related
Documentation
Ethernet OAM •
• Ethernet OAM Link Fault Management on page 143
• Example: Configuring Ethernet LFM Between Provider Edge and Customer Edge on
page 144
• Example: Configuring Ethernet LFM for CCC on page 145
• Example: Configuring Ethernet LFM with Loopback Support on page 148
Example: Configuring Ethernet LFM with Loopback Support
In this example, LFM is configured between PE and CE. The PE can put the CE in remote
loopback mode. This allows the PE to have all the traffic sent to the CE looped back for
diagnostics purposes, as shown in
Figure 22 on page 148 .
Figure 22: Ethernet LFM with Loopback Support
Copyright © 2013, Juniper Networks, Inc. 148
Junos OS 13.1 MX Series 3D Universal Edge Routers Solutions Guide