JVC VN-C20 User Manual
Page 66
66
Operation (continued)
Built-in Viewer Settings
The setting window of the built-in viewer will be displayed upon clicking the [Setup] button.
Operation of Built-in Viewer
(continued)
J
I
H
G
D
E
C
B
A
F
K
L
A
Display
Select
AOnB to rotate the image display by 180×.
When this is set to
AOnB, inversion processes that are applied may
increase the load on the computer.If the computer's capacity is
inadequate, therefore, the frame rate will deteriorate during transmission
via TCP and noise occurs due to losses during packet reception via
multicast.To use this feature with inversion set to
AOnB, make sure that
you use a computer with adequate performance, or reduce the
processing load by adjusting the [Encoding] settings (file size, frame rate,
frame size). (
B
Title
Select
AOnB to display the camera ID.
The camera ID can be set either at the VN-C20 unit or on the [Camera]
page. (
C
Time
Select
AOnB to display the time.
This indicates the time that is stored in the JPEG data.
D
Display MD
Selecting
AOnB displays the area for which motion is detected in a
different color.
VN-C20_EN.book Page 66 Tuesday, January 31, 2006 1:51 PM