JVC VN-C20 - Manual (Page 40)

40
Setting Using Internet Explorer (continued)
Alarm Environment Page (continued)
Setting (continued)
C Alarm Output For setting the alarm output.
Output
Duration For setting the output time of [Manual Output].
Manual
Output For operating alarm output manually.
The current output status appears on the right. When [Output Duration] is set
to
A0B, pressing the [Make] buttons switches the alarm to Make output, while
pressing the [Break] buttons switches the alarm to Break output.
When [Output Duration] is set to a value other than
A0B, pressing the [Make]
buttons switches the alarm to Make output only during the duration of the
output, upon which it switches to Break output.
When the output duration is set to a value other than
A0B, pressing the
[Break] buttons switches the alarm to Break output only during the duration
of the output, upon which it switches to Make output.
VN-C20_EN.book Page 40 Tuesday, January 31, 2006 1:51 PM