JVC VN-C20 - Manual (Page 24)

24
Network Settings (continued)
ⅷ Changing the IP address using the Internet Explorer (continued)
4.
Launch the Internet Explorer
Notes:
● If the proxy server settings on access to the Internet via the Internet Explorer is enabled, you may
not be able to specify the IP address directly. In this case, change the proxy settings of the Internet
Explorer.
● After the ASecurity SettingsB screen appears, press the [OK] button to proceed.
5.
Enter the user name and password (login as an administrator)
Note:
● After the ASecurity SettingsB screen appears, press the [Yes] button to proceed.
IP Address Settings
(continued)
A B Enter the IP address of the unit.(Factory setting, http://
192.168.0.2, is available when there is no DHCP server.) Click [Go].
A
B
C
Enter the user name.
This is set to
AadminB by default.
Enter the password.
This is set to
Avn-c20B by default.
Click [OK].
VN-C20_EN.book Page 24 Tuesday, January 31, 2006 1:51 PM