JVC VN-C20 - Manual (Page 50)

50
Setting Using Internet Explorer (continued)
Time Page
This page is for setting time.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings upon changing.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
Setting (continued)
B
C
D
A
E
A NTP For setting the NTP client function.
Access to acquire time from the specified NTP server at regular intervals is
possible when this is enabled.
In addition, time will be recorded in the JPEG headers distributed by VN-
C20. Discontinuity in JPEG headerís time may occur immediately before and
after acquiring time from the NTP server.
B NTP Server For setting the IP address of the NTP server.
Install an NTP server and not an SNTP server.
C Access Interval For setting the time interval for access to the NTP server.
D Time Displays the time on the clock of VN-C20.
The clock time can be changed by entering a value. (However, second value
cannot be specified.)
In addition, time will be recorded in the JPEG headers distributed by VN-
C20. Discontinuity may occur in the JPEG header's time immediately before
and after changing the time.
E Time Zone For setting the time zone.
VN-C20_EN.book Page 50 Tuesday, January 31, 2006 1:51 PM