JVC GY-HM700CHE - Manual (Page 36)

32
Preparations
Switching SDHC cards
When both card slots are inserted with SDHC cards, you can
use the [SLOT SELECT] button to switch the card to use.
When the memory on an SDHC card is full during recording,
data recording automatically switches to the other card.
Note:
● The [SLOT SELECT] button is disabled during recording
or playback. Cards will not be switched even if you press
the button.
Formatting (Initializing) SDHC Cards
When the following cards are inserted, AFormatting
Required
B appears. Format the card using the camera
recorder menu.
● Unformatted SDHC cards
● SDHC cards formatted under different specifications
* For details of the menu operation, see [Basic Operations in
Menu Screen] (A Page 66 ).
Note:
● Be sure to format the SDHC card on this camera recorder.
SDHC cards formatted on a PC and other peripheral
equipment cannot be used on this camera recorder.
Memo:
● To cancel the message display, press the [CANCEL]
button. A [!] mark appears at the remaining media display
area when an SDHC card that requires formatting is
inserted.
1
Select [Format Media] in the [Media] menu.
(A Page 89)
2
Select the slot of the SDHC card to be formatted and
press the Set button ( R ).
3
The status of the selected SDHC card appears.
4
Select [Format] and press the Set button ( R ).
5
Formatting starts.
6
Formatting is complete.
ACompleteB appears when formatting is complete.
Memo:
● If you do not want to format the card, select [Cancel] or
press the [CANCEL] button to return to the previous
screen.
● If you remove the SDHC card during formatting, AFormat
Error!
B appears and the camera recorder returns to the
previous screen.
● During formatting, menu operation is unavailable but you
can start recording. However, this is only available when a
recordable SDHC card is inserted in the other slot.
● Formatting cannot be performed in the following cases.
● Recording is in progress on the SDHC card to be
formatted.
● SDHC card is not inserted.
● Write-protect switch of the SDHC card is set
( is displayed).
Note:
● If you format the SDHC card, all data recorded on the
card, including video data and setup files, will be deleted.
SDHC Cards (continued)
[SLOT SELECT] Button
[CANCEL] Button
Cross-Shaped
Button ( JKH
I),
Set button ( R)
2
4