JVC GY-HM700CHE - Manual (Page 14)

10
Introduction
Side Control Panel
A [VF BRIGHT] Viewfinder Luminance Adjustment Knob
(A Page 28)
B
[VF PEAKING] Contour Adjustment Knob (A Page 28)
Memo:
● This knob does not function when Focus Assist is
activated. (A Page 35)
C
[FOCUS ASSIST] Focus Assist Button
Press this button during shooting to display the focused area
in either blue, red, or green. This enables easy and accurate
focusing. (A Page 35)
D [USER1], [USER2], [USER3] User Buttons (A Page 74)
Use these buttons to switch shooting conditions according to
the object. The functions change as below according to the
operation mode (A Page 7).
Memo:
● Set the functions of the [USER1,USER2,USER3] buttons
in the menu. (A Page 74)
● When the menu screen is displayed, these buttons
function as the menu operation buttons.
(A Page 66 [Operation Buttons])
E [MENU] Menu Button (A Page 66)
F
[ND FILTER] ND Filter Switch (A Page 43)
G
[STATUS] Status Screen Display Button
● Press the [STATUS] button to display the status screen on
the viewfinder and LCD monitor during normal screen
display (when the menu screen is not displayed).
(A Page 16 [Status Screen])
● Switches between [Main Menu] and [Favorites Menu]
when the [STATUS] button is pressed while the menu
screen is displayed. (A Page 66)
H
[GAIN] Sensitivity Selection Switch (A Page 37)
I
[WHT.BAL] White Balance Selection Switch
(A Page 40)
You can select one of the three white balance types.
J
[POWER] Power ON/OFF Switch
Turns ON/OFF the power.
When the power is OFF,
APOFFB appears on the LCD
monitor and viewfinder.
Wait for 5 seconds or more to turn on the power again.
K
[REC] REC Trigger Button (Recording Start/Stop)
Starts/stops recording.
The [REC] trigger button (A Page 9) Z on top and the [REC]
trigger button (A Page 14) of the lens are interlocked with
this button.
Memo:
● When [1394 Rec Trigger] in the [Others] menu is set to
ASplitB, this button becomes the recording start/stop
button of the external equipment. (A Page 88)
(A Page 116 [Backup Recording])
L
[AUDIO LEVEL CH-1/CH-2]/[AUTO] CH-1/CH-2
Recording Level Adjustment Knob/Auto Indicator
(A Page 44)
M [CANCEL] Cancel Button
Cancels various settings and stops playback.
N
Cross-Shaped Button ( JKH I )/Set Button ( R )
The function changes according to the operation status of
the camera recorder.
Ⅵ During menu operation (all modes) (A Page 66)
Center Set button ( R ) : Confirms menu items and
setting values
Cross-shaped button ( JK ) : Selects menu items and
setting values
Ⅵ During Camera mode
Shutter operation:
Center Set button ( R ) : Shutter ON/OFF
Cross-shaped button ( JK ) : Switches shutter speed when
shutter is ON
AE level operation :Cross-shaped button ( H I )
Names of Parts (continued)
During Camera Mode During Media Mode
[USER1]
Button ● Activates the function assigned
to [USER1] in the menu.
● Loads the [TC Preset] screen
when pressed together with
the [MENU] button.
(A Page 48)
Adds/deletes OK
mark.
(A Page 64)
[USER2]
Button ● Activates the function assigned
to [USER2] in the menu.
● Resets settings on the [TC
Preset]/[UB Preset] screen
when pressed.
(A Page 48, 49)
Deletes clip.
(A Page 62)
[USER3]
Button ● Activates the function assigned
to [USER3] in the menu.
^
A
B
D
E
F
G
I
J
L
M
N
O
P
K
C
H